Antimicrobial Thermoplastic Splint Finger Support Occupational Therapy

Thermoplastic Finger Splints Low thermoplastic Splints Sheet

Thermoplastic Finger Splints for Hand & Wrist support

Perforations: Can be perforation or non perforation

Thickness: 1.6mm, 2.4mm, 3.2mm

This Finger support thermoplastic splint is used for Immobilzation of injuryed or fracture finger, provie firm stablilization and treatment. Protect the tip of finger especially.

Maidfirm Has several types of Thermoplastic, Please contact me for more details and we will recomment to you for a suitable one.

Below is Maidfirm Medical products details in shortly, please refer:

We are a professional manufacturer to produce Low Temperaturer Thermoplastic Material in China for 10 years.

We can accept custom service for thickness, size, colors and perforations.

Maidfirm can offer you a suitable, good quality and Multi-thickness of thermoplastic to make any kind of splints like static splints, dynamic splints for upper limb and lower limb, body orthostics ,post-operative splints and any brace of orthoses, ect.

Product Benifits:

• Light weight, good plasticity, x-ray translucent, latex free, non-toxic, non-irritating to skin, antimicrobial and environment friendly with self-degradation.
• Turns transparent when activated to easily see when it's ready.
• Moldadble material perfectly conforms to individual, making a highly-personalized orthosis
• Variety of sizez, thickness, perforations and stretch options allow for even more precise customization.
• Easy to trim as needed.

Features:

Light weight, good plasticity, x-ray translucent, latex free, non-toxic, non-irritating to skin, antimicrobial and environment friendly with self-degradation.

Maidfirm can offer you a suitable and good quality of thermoplastic to make any kind of splints like static splints, dynamic splints for upper limb and lower limb, body orthostics ,post-operative splints and any brace of orthoses, ect.

Thermoplastic Splints Sheets Details:

Remark: We also offer custom service for any thickness and colors.
Welcome contact us for more details.

Below are many kind of Pre-cut Splints made of Maidfirm Low Temperature Thermoplastic Sheets

FAQ:

1.Q:Are you a factory or trading company?
A:We are manufacturer, we produce radiotherapy immobilization mask, rehabilitation splints, thermoplastic splinting materials... For more, please visit our website.

2. What kind of thermoplastic you can offer?

A. We have 2 general type of thermoplastic material for your choice. Maidfirm M and Maidfirm E.

3. How can I get the suitbable material?

A. We would like to send you small size of samples to you for testing, you just handle well freight cost that is fine. We accept prepay freight cost and freight collect. We will advise you.

4. How to heat material?

A.: Heating method- water heat or dry heat. Same as other famous brands of thermoplastic like Orfit,Aquaplast and Klarity, same heating method. Normally we use water bath to heat thermoplastic at most.

5. Do you have video to teach us how to fabricture with your thermoplastic splinting material?

A: Sure, we would like to do it.

6. What thickness you can offer?
A: 1.6mm, 2.0mm, 2.4mm, 3.2mm and 4.0mm, we also accept to custom other thickness like less than 1.6mm thick. Welcome to contact us for more details.

7. Dose your thermoplastic sheet has warranty time?
A: Yes, 2-3 years.

8. What about the quality?
A: Maidfirm medcial have been worked in this field for over 7 years and have good reputation in domestic market. We always insist on using raw material PCL from abroad and same precise technical to product low temperature thermoplatic. To win by quality, not by low price in poor quality.